Certificate of Analysis · Lot release · Issued for Epic Wholesalers LLC -dba-Epic Peptides Lab
Snap-8 10 mg Pen
Lot PL-2610-194 · Solution · Label claim 10 mg/mL
Tested in-house by PrymaLab
In-house analytical result, not an independent third-party test
Lot / batch number
PL-2610-194
Date made
2026-10-07
Date of analysis
2026-10-08
Date issued
2026-10-22
Retest / expiry
2028-10-07
Units in lot / sampled
378 / 2
Storage
—
Certificate type
Lot COA, 2 pages
Compound
Snap-8
Acetyl octapeptide-3 (Ac-EEMQRRAD-NH2)
CAS number
868844-74-0
Molecular formula
C41H70N16O16S
Theoretical mass (avg.)
1,075.20 Da
Sequence
Ac-EEMQRRAD-NH2
Purity · RP-HPLC, area %
99.72%
Specification ≥ 99.0% • main peak at 13.51 min
Identity · Observed Mass
1,075.25 Da
Theoretical 1,075.20 Da • +0.05 Da (47 ppm)
Overall conclusion
PASS
Meets every specification for the tests performed
Test
Method
Specification
Result
Conclusion
Identity (mass)
LC-MS, ESI positive
Theoretical ± 1.0 Da
1,075.25 Da
PASS
Purity
RP-HPLC, UV 214 nm, area%
≥ 99.0%
99.72%
PASS
Largest impurity
RP-HPLC, area%
≤ 1.0%
0.14% (RT 13.10)
PASS
Assay (label claim)
Assay vs label claim
9.5–10.5 mg/mL
10.10 mg/mL
PASS
Bacterial endotoxin
LAL, kinetic
≤ 5.0 EU/mg
0.143 EU/mg
PASS
Sterility
USP <71>, 14-day
No growth
No growth
PASS
1HPLC chromatogram
Data file: PL-2610-194-HPLC.raw · Column C18, 150 × 4.6 mm · UV 214 nm
Peak plot drawn from the integrated peak table (area %, log scale); it is not the instrument trace, which is retained in PL-2610-194-HPLC.raw. † Nominal reference retention time for the assigned impurity; the main-peak RT is observed in this lot.
Epic Wholesalers LLC -dba-Epic Peptides Lab
Certificate of Analysis · continued
Snap-8 10 mg Pen · Lot PL-2610-194 · Certificate PL-26-00307
Lot PL-2610-194
Method, peak table and approval
2HPLC method · PL-2610-194-HPLC.raw
Instrument
Waters Alliance e2695
Data System
Empower 3
Detector
UV absorbance
Detection Wavelength
214 nm
Column
C18, 150 × 4.6 mm, 3.5 µm
Mobile Phase A
0.1% TFA in water
Mobile Phase B
0.1% TFA in MeCN
Gradient
5–95% B over 25 min (linear)
Flow Rate
1.0 mL/min
Column Temperature
40 °C
Injection Volume
10 µL
3Gradient program
Time (min)
% A
% B
0.0
95
5
25.0
5
95
4Peak table
Peak
RT (min)
Area
Area %
1
12.20 †
—
0.05
2
13.10 †
—
0.14
3
13.51
—
99.72
4
14.70 †
—
0.09
Total
—
100.00
Peaks: 1 deamidation product; 2 methionine oxidation product; 3 main peak (Snap-8); 4 truncated sequence · Area % from the integrated peak table (absolute areas are not part of the lot-release export) · † nominal reference RT for the assigned impurity · Purity = main peak area ÷ total integrated area × 100, to two decimals; main peak shaded.
5Identity by mass spectrometry
Instrument
Waters SQD
Ionization / Mode
ESI, positive
Reference m/z (charge)
538.61 (2+) · 359.41 (3+)
Deconvoluted Mass
1,075.25 Da
Theoretical Mass
1,075.20 Da
Difference
+0.05 Da (47 ppm)
Data File
PL-2610-194-MS.d
Acceptance
Within ± 1.0 Da
6Additional tests
Test
Performed by
Date
Report / file
Assay vs label claim
PrymaLab Analytical
2026-10-08
—
Endotoxin (LAL, kinetic)
PrymaLab Analytical
2026-10-08
—
Sterility (USP <71>, day-14 read-out)
PrymaLab Analytical
2026-10-22
—
A test with no row here was not performed on this lot. Outside-laboratory reports, when used, are attached and named below.
7Review and approval
D. Reynolds Analyst · performed the testing Date: 2026-10-22
S. Calloway Reviewer · checked against raw data Date: 2026-10-22
M. Phelps Lab Director · approved for release Date: 2026-10-22