Certificate of Analysis · Lot release · Issued for Epic Wholesalers LLC -dba-Epic Peptides Lab
Semax 1 mg/mL Pen
Lot PL-2610-188 · Solution · Label claim 1 mg/mL
Tested in-house by PrymaLab
In-house analytical result, not an independent third-party test
Lot / batch number
PL-2610-188
Date made
2026-10-07
Date of analysis
2026-10-08
Date issued
2026-10-22
Retest / expiry
2028-10-07
Units in lot / sampled
380 / 2
Storage
—
Certificate type
Lot COA, 2 pages
Compound
Semax
ACTH(4–7)-Pro-Gly-Pro heptapeptide (MEHFPGP)
CAS number
80714-61-0
Molecular formula
C37H51N9O10S
Theoretical mass (avg.)
813.90 Da
Sequence
MEHFPGP
Purity · RP-HPLC, area %
99.70%
Specification ≥ 99.0% • main peak at 10.63 min
Identity · Observed Mass
813.91 Da
Theoretical 813.90 Da • +0.01 Da (12 ppm)
Overall conclusion
PASS
Meets every specification for the tests performed
Test
Method
Specification
Result
Conclusion
Identity (mass)
LC-MS, ESI positive
Theoretical ± 1.0 Da
813.91 Da
PASS
Purity
RP-HPLC, UV 214 nm, area%
≥ 99.0%
99.70%
PASS
Largest impurity
RP-HPLC, area%
≤ 1.0%
0.15% (RT 12.10)
PASS
Assay (label claim)
Assay vs label claim
0.95–1.05 mg/mL
1.02 mg/mL
PASS
Bacterial endotoxin
LAL, kinetic
≤ 5.0 EU/mg
0.401 EU/mg
PASS
Sterility
USP <71>, 14-day
No growth
No growth
PASS
1HPLC chromatogram
Data file: PL-2610-188-HPLC.raw · Column C18, 150 × 4.6 mm · UV 214 nm
Peak plot drawn from the integrated peak table (area %, log scale); it is not the instrument trace, which is retained in PL-2610-188-HPLC.raw. † Nominal reference retention time for the assigned impurity; the main-peak RT is observed in this lot.
Epic Wholesalers LLC -dba-Epic Peptides Lab
Certificate of Analysis · continued
Semax 1 mg/mL Pen · Lot PL-2610-188 · Certificate PL-26-00301
Lot PL-2610-188
Method, peak table and approval
2HPLC method · PL-2610-188-HPLC.raw
Instrument
Waters Alliance e2695
Data System
Empower 3
Detector
UV absorbance
Detection Wavelength
214 nm
Column
C18, 150 × 4.6 mm, 3.5 µm
Mobile Phase A
0.1% TFA in water
Mobile Phase B
0.1% TFA in MeCN
Gradient
5–95% B over 25 min (linear)
Flow Rate
1.0 mL/min
Column Temperature
40 °C
Injection Volume
10 µL
3Gradient program
Time (min)
% A
% B
0.0
95
5
25.0
5
95
4Peak table
Peak
RT (min)
Area
Area %
1
9.50 †
—
0.09
2
10.63
—
99.70
3
11.40 †
—
0.06
4
12.10 †
—
0.15
Total
—
100.00
Peaks: 1 methionine oxidation product; 2 main peak (Semax); 3 deamidation product; 4 truncated sequence · Area % from the integrated peak table (absolute areas are not part of the lot-release export) · † nominal reference RT for the assigned impurity · Purity = main peak area ÷ total integrated area × 100, to two decimals; main peak shaded.
5Identity by mass spectrometry
Instrument
Waters SQD
Ionization / Mode
ESI, positive
Reference m/z (charge)
814.91 (M+H)+
Deconvoluted Mass
813.91 Da
Theoretical Mass
813.90 Da
Difference
+0.01 Da (12 ppm)
Data File
PL-2610-188-MS.d
Acceptance
Within ± 1.0 Da
6Additional tests
Test
Performed by
Date
Report / file
Assay vs label claim
PrymaLab Analytical
2026-10-08
—
Endotoxin (LAL, kinetic)
PrymaLab Analytical
2026-10-08
—
Sterility (USP <71>, day-14 read-out)
PrymaLab Analytical
2026-10-22
—
A test with no row here was not performed on this lot. Outside-laboratory reports, when used, are attached and named below.
7Review and approval
D. Reynolds Analyst · performed the testing Date: 2026-10-22
S. Calloway Reviewer · checked against raw data Date: 2026-10-22
M. Phelps Lab Director · approved for release Date: 2026-10-22
